USED 64" X 64" HYDRAULIC PRESS 900 TON

Home » USED HYDRAULIC PRESSES & RUBBER MOLDING PRESSES

900 TON HYDRAULIC PRESS A

PEBSCO ITEM #445 900 TON PRESS 64" X 64" 

·OPERATIONAL VIDEO: https://drive.google.com/open?id=1hGcJuw2ANwK4RT679s3Sa7997ngMR8rT 

Slab side press frame

· Design based on upstroke principle; nine (9) single acting hydraulic 5.125” cylinders

· Electric platens – three (3); upper, lower and middle, sized at 64” by 64”

· Openings – two (2) with approx. 4” open height

· 480V Platens electrically heated up to 400F

· Operators control panel per photos

· Press system previously used for composite molding of personal armor vest components.

· Paul Munroe hydraulics with Baldor 10HP motor direct coupled to Victor Fluid Power
axial piston pump; 33 gallon hydraulic oil tank

· Floor standing installation, requires no special foundation or pit; press weight: 36,000 lbs

RECENTLY REMOVED FROM SERVICE 

900 TON HYDRAULIC PRESS A
900 TON HYDRAULIC PRESS A
900 TON HYDRAULIC PRESS A
* These fields are required.